Our Products

1 2 Next

3M Fire Barrier Composite Sheet CS-195+

Ideal for firestopping blank openings and through-penetrations of multiple cables , pipe ducts, bus ducts and cable trays

› Up to 4-hour fire ratings per ASTM E 814 (UL 1479)
› No mixing or damming required
› Easy to install using common trade tools
› Easy to fasten, bolt punch or drill through (mounts easily with self0tapping screws or anchor bolts)
› Re-enterable
› Bottom-of-floor applications available
› Low VOC
› Available sizes: 16" x 28", 36" x 24", 36" x 36", 36" x 41" and 28" x 52"

Product Data Place Request

3M Fire Barrier Moldable Putty MP+ Stix and Pads

Designed to firestop a wide variety of through penetrations, including cable, conduit, insulated pipe and metal pipe

› Up to 3-hour fire ratings per ASTM E 814 (UL 1479)
› Provides cold smoke seal (L-rating)
› Pliable - can form into almost any desired shape
› Will not dry out or crumble - can be sealed for reuse
› Available in 1/10" thick pads: 4" x 8", 7" x 7" and 9.5" x 9.5"
› Available stix sizes: 1.45" x 6" and 1.4" x 11"

Product Data Place Request

3M Fire Barrier Wrap Ultra GS

Flexible, intumescent wrap strip expands when exposed to high temperatures.

› Up to 3-hour fire ratings per ASTM E 814 (UL 1479)
› Excellent weatherability
› For use in drain, waste, vent or closed pipe systems
› Easily cut and shaped with common tools
› Used to firestop the following plastic pipes: ccPVC, PVC, FRPP, PVDF, ccABS and ABS
› Provides a smoke seal when used in conjunction with 3M Fire Barrier Sealant (CP 25WB+, IC 15WB+, 3000WT) or 3M Fire Barrier Moldable Putty MP+

Product Data Place Request

3M Fire Barrier RC-1 Restricting Collar

Works in conjunction with 3M FS-195+ Wrap/Strip or 3M Interam Ultra GS to firestop plastic pipes up to 10" in diameter

› 28 gauge steel
› Convenient 25 ft. roll - cut only what you need

Product Data Place Request

3M Fire Block Foam FB-Foam

Combines the high-speed application properties of foam and the long-lasting protection of caulk

› Ready-to-use - no mixing required
› Expands up to 200% in volume to quickly and effectively seal openings
› Heat-resistant up to 240oF
› Tested to ASTM 84 (modified) as a Type V Residential Fireblock
› Draftstop - helps reduce air infiltration
› Thermal insulator - R-Value of 4-5 per inch typical
› Excellent adhesion - bonds to concrete, brick, metals, wood, plastic and cable jacketing
› Tack-free in approximately 5 minutes
› Minimal shrinkage and sag-resistance help ensure longevity
› Meets the intent of International Building Code (IBC) and International Residential Code (IRC) Fireblocking

Product Data Place Request

3M FireDam Spray 200

This sprayable coating is a quick and easy method for firestopping fire rated construction joints, including: head-of-wall, wall-to-wall,  floor-to-floor and perimeter joints.

› Up to 4-hour fire ratings for joint systems per ASTM E 1966 (UL 2079)
› Up to 2-hour fire ratings for through penetrations per ASTM E 814 (UL 1479)
› Elastomeric - forms a flexible seal with compression/extension of up to ±50% of nominal joint width
› High coverage rate reduces installation time
› Fast-drying, low-sag formula
› Applied with conventional airless spray equipment
› Paintable when cured
› Applied as 1/8" wet coating (per system details)
› Easy clean-up with water
› Available in 5 gallon pails

Product Data Place Request

3M Interam Endothermic Mat E-5A-4

Endothermic - releases chemically bound water to cool the assembly when exposed to high temperatures to protect structural steel, cable trays and circuits in conduits

› Up to 4-hour protection for structural steel (ASTM E 119), up to 3-hour electrical circuit protection (ASTM E 1725) and up to 3-hour electrical circuit protection (ASTM E1725) and up to 2-hour protection for wall opening membranes (UL1479)
› Outstanding performance in high-intensity fires, provides protection against large hydrocarbon pool fires in accordance with ASTM E 1529 (UL 1709)
› Made of a combination of organic/inorganic materials
› Outdoor durable with covered with 0.010" stainless steel jacketing.
› Available with a stainless-steel or aluminium backing
› Easily cuts to size and flexible - install in new applications or directly over existing fire protection
› 2/5" thick x 24-1/2" wide x 20 ft. long roll

Product Data Place Request

1 2 Next

Comments are closed.